Monday, November 6, 2017

2017 Itty Bitty Giant Hat Drive Tally



Good evening all!!!!

Wow what a busy month it's been! Finishing ends, adding buttons, posting parcels! Then BAM along comes Halloween and I get totally creatively snowed under! I've also added some photos below of my hats, and all the patterns from this year!

Nevermind! Today I'm here to give you the tally for the 2017 Itty Bitty Giant Hat Drive, for the number of hats that have been received throughout October by Chance's Clothes Project.


Are you ready? Set?

DRUM ROLL PLEASE!!!!!!

The tally is2979 HATS!!!


Oh! My! WORD! Lovelies, I just can't even. I have goosebumps! Honestly! Two thousand, nine hundred and seventy nine hats! Let me break that down a bit. At 3 hats per pack, that is enough hats for 993 packs. WOW! Gals, have you got any idea just how incredible that is? That's insane right there!

You guys pulled together and did something completely mind boggling AMAZING this year and I can not thank you enough! I'm sitting here looking at these number, while Im typing, with tears in my eyes. What an honour you have all done. What an amazing display of support and understanding and caring. There will be hundreds of families, that will now, because of YOU have something size appropriate for their angel. Hundreds of families that will know they are not alone. That will know someone out there cares.

You guys hit it out of the ballpark, and I am so proud of each and every one of you who joined in. Thankyou, from the bottom of my heart.

Something neat we've been doing for the last few years is a map that logs the postcodes parcels come from, it's actually pretty cool to see. If you'd like to check it out, you can do so here: World Map



Also, please remember that this tally was for hats donated to CCP only. They are whom I work with each year in Australia as the beneficiaries of the hat drive. There are most likely many THOUSANDS more hats that have been donated worldwide as a part of the IBGHD that I don't know about, and that is even more incredible!!

So, where to from here?

Every year it does get harder to come up with more designs, it's much more challenging. But, I have never let a little challenge stand in the way! So yes, we will absolutely be back again next September! Whether I have 30 completely new patterns, or a mix of new and old, who knows. But we have almost a whole year to plan and prep!



There is one more thing I'd like to talk about before we finish up here this evening. As I said, within Australia hats get sent to CCP. A lot of people would love to have somewhere international to post to as well. So... if you run an organisation that makes baby bereavement packs that are given to families for free in another country, and you would like to get involved for next years hat drive, PLEASE email me! (If your a member but don't actually own/run it, please pass the info on to those who do) I'm looking for 1, maybe 2 (depending on country size and location) organisations per country. So that we can start thinking about taking this global. Groups that get accepted will need to do a few things to join in (Like sharing the pattern posts on social media daily, and keeping a tally of the hats they receive for the drive, and possibly helping with pattern translation into other languages, but I may also beable to help there too) but I think overall it would be pretty incredible to see tallies from around the globe, a map with all the countries on it, and grass roots organisations in other parts of the world benefiting large scale because of the hat drive. So hit me up if you want to talk logistics for 2018! If we can hit almost 3000 in just Australia, Imagine what we can do globally!!!!!!






Saturday, September 30, 2017

30. Amira Preemie Beanie











Well lovelies, here we are. Day 30! What a month it's been! I know the ladies in the CCP crafters group have learnt a whole bunch of new stitches this past month!

I have thoroughly enjoyed seeing every single photo you have shared with me this September, and have been blown away time and time again by your skills and colour choices! Amazing, simply amazing. Thankyou to everyone who joined in, regardless of if you used my patterns or not. Thankyou too for all the shares from everyone! Word of mouth is so important for events like these!

I always feel a little emotional writing up the last post. It's a weird combination of relief, excitement and a bit of sad. So so many hours of work throughout the last few months, so many stitches and so much time reflecting on not only my own angels, but the ones that will eventually wear these hats, and the ones who they are named after.

The next 15 days are a good time to weave in ends, add any extras and reflect on the enormously amazing contributions you have all made. Your hats will bring a family so much comfort and love in their darkest hours. Don't forget to post your hats on the 15th, which is Pregnancy and Infant Loss Remembrance Day, Now, I know that falls on the weekend this year, so feel free to do it a few days earlier if you live somewhere that doesn't have weekend postage.

For those in Australia, your hats can be sent to

Chance's Clothes Project
c/- Cowra Neighbourhood Centre
15 Vaux St
Cowra NSW 2794

Please add a small note with the hat tally in the parcel, your town, and postcode. We love keeping tally and adding to our world map.

Now, onto today's beanie!

The Amira beanie, is another bottom up design. Gosh I love these, they just look so good! The Amira beanie will fit a bub of 32-34 weeks gestation, and is pretty easy once you get the hang of the clusters. Be sure to pay attention to the cluster decreases, they can be a bit tricky if you've never done something like this before, but Ive wrote out how to do them, so you should be good to go <3

Thankyou for joining me on this journey!









Amira Beanie


You Will need:
DK Weight/8ply Yarn in 3 colours.
3mm hook.


Sized To Fit:
32-34 Weeks Gestation

Band:

1: Ch6, sc into the second chain from hook and each chain across - 5sc

2-46 ch1, turn, sc across in the back looks only

End off, sew band together, being careful not to twist.

Rejoin yarn to the band somewhere near the join and ch1, sc evenly for 48 stitches around the band, working in the row ends.

STARTING CLUSTER: *yo, insert hook in same st, draw up a loop, yo, draw yarn through two loops*, repeat once, yarn over, pull through all 3 loops on hook,


CLUSTER: *yo, insert hook into the space, draw up a loop, yo, draw yarn through two loops* repeat 2 more times in the same space, yarn over, draw through all 4 loops on hook.


CLUSTER DECREASE: yo, insert hook in next ch1 space, draw up a loop, yo, draw yarn through 2 loops, yo, insert hook into next ch1 space, draw up a loop, yo, draw yarn through two loops, yo, insert hook into the same ch1 space, draw up a loop, yo, pull through 2 loops, yo, pull through all 4 loops on hook.

1: Ch2, Starting Cluster, ch1, skip the next stitch, *cluster, ch1, skip the next stitch*, repeat around, join to the first cluster.

Change Colour 
2: slst into the ch1 space, ch2, starting cluster in the same space, ch1, *cluster in the next ch1 space, ch1*, repeat around, join to the first cluster.

Change Colour
3: Repeat round 2

Change Colour
4: Repeat round 2

Change Colour 5: Slst into the ch1 space, ch2, starting cluster in the same space, ch1, *cluster in the next ch1 space, ch1* repeat once, cluster decrease, **cluster in the next ch1 space, ch1*, repeat 2 more times, cluster decrease, ch1,** repeat around, until you have 4 ch1 spaces left, cluster in each of them, join to the first cluster

Change Colour 6: Slst into the first ch1 space, ch2, starting cluster in the same space, ch1, cluster in the next ch1 space, ch1, cluster decrease, ch1, *cluster in the next ch1 space, ch1, cluster in the next ch1 space, ch1, cluster decrease, ch1*, repeat 3 times, join to first cluster.

Change Colour 7: Slst into the next ch1 space, ch2, starting cluster, ch1, cluster decrease, ch1, *cluster in the next ch1 space, ch1, cluster decrease, ch1*, repeat 3 times, join to first cluster.

Change Colour 8: Slst into the next ch1 space, ch2, starting cluster, ch1, cluster decrease, ch1, *cluster in the next ch1 space, ch1, cluster decrease, ch1*, repeat around, ending with a cluster. Join to the first cluster. End off leaving a long tail.

Using a darning needle, use the tail to gather the hole closed. Weave in all tails.





Friday, September 29, 2017

29. Lynli Preemie Bonnet




Good morning all and hello to day 29!

Wow, we are almost at the end of the month now. That's incredible! I hope everyone has been enjoying the patterns thus far!

Today's pattern, the Lynli bonnet is a sweet little one that makes use of stacked shells and V stitches. When I get a chance, I think Ill go back and add a nice big crochet flower to the side of one of these.





Lynli Preemie Bonnet

You Will Need
DK Weight/8ply Yarn
4.5mm hook

Sized To Fit:
36-38 weeks gestation

1: Into a magic ring ch3, dc 8 times, join to the first dc. -8dc

2: Ch3, dc in the same stitch, 2dc in each stitch around, join to the ch3. -16dc

3: Ch3, dc in the same stitch, dc in the next stitch, *2dc in the next stitch, dc in the next stitch*, repeat around, join to the ch3. -24dc

4: Ch3, dc in the same stitch, dc in the next 2 stitches, *2dc in the next stitch, dc in the next 2 stitches*, repeat around, join to the ch3. -32dc

5: Ch3, dc in the same stitch, dc in the next 3 stitches, *2dc in the next stitch, dc in the next 3 stitches*, repeat around, join to the ch3. -40dc

6: Ch3, dc in the same stitch, dc in the next 4 stitches, *2dc in the next stitch, dc in the next 4 stitches*, repeat around, do not join to the ch3. -48dc

7: Ch1, turn, sc in the same stitch, ch2, sk3, 5dc in the next stitch, ch2, sk3, sc in the next stitch, *ch2, sk3, 5dc in the next stitch, ch2, sk3, sc in the next stitch*, repeat across, ending with a sc in the last stitch.

8: Turn, ch5 (counts as first dc and ch2), skip the ch2 and next 2 dc's, (dc, ch1, dc) in the next dc, ch2, skip the next 2 dcs and the ch2, dc in the next sc, *ch2, skip the next ch2 and the next 2 dc's, (dc, ch1, dc) in the next dc, ch2, skip the next 2 dc's and the ch2, dc in the next sc*, repeat across, ending with a dc in the last sc.

9: Ch5, turn, sk the ch2, 5dc in the next ch1 space, *ch2, sk the next ch2, sc in the next dc, ch2, sk the next ch2, 5dc in the next ch1 space*, repeat across ending with a dc in the 3rd ch of the previous rows ch5.

10: Turn, ch5 (counts as first dc and ch2), skip the ch2 and next 2 dc's, (dc, ch1, dc) in the next dc, ch2, skip the next 2 dcs and the ch2, dc in the next sc, *ch2, skip the next ch2 and the next 2 dc's, (dc, ch1, dc) in the next dc, ch2, skip the next 2 dc's and the ch2, dc in the next sc*, repeat across, ending with a dc in the 3rd ch of the previous rounds ch5.

11.: Ch5, turn, sk the ch2, 5dc in the next ch1 space, *ch2, sk the next ch2, sc in the next dc, ch2, sk the next ch2, 5dc in the next ch1 space*, repeat across ending with a dc in the 3rd ch of the previous rows ch5.

12: Do not turn, ch1, sc evenly around the neckline (for me that was 26sc) when you reach the corner of the bonnet, ch35 to make a tie. End off

Rejoin yarn to the other corner and ch35 to make the second tie.


Thursday, September 28, 2017

28: Jordan Preemie Beanie



Good morning all and welcome to day 28!
Today's beanie was a really fun one to design, and something I don't do often enough! Mixing stitches! The Jordan beanie is sized to fit 38 week preemies. It features a variety of stitches, and when mixed with various coloured yarns it creates something pretty special indeed.
I haven't given any instructions on how many colours to use. That is your choice, and a part of the fun of a pattern like this!




The Jordan Beanie.

You Will Need
4mm hook
DK weight yarn in multiple colours

Sized To Fit:
38 Weeks Gestation

1: Into a magic ring make 8hdc, join to the first hdc - 8hdc

2: Ch2, hdc into the same stitch, 2hdc in each stitch around, join to the ch2. - 16hdc

Change Colour
3: Ch3 (counts as hdc and ch1), hdc in the same stitch, skip the next stitch, *(hdc, ch1, hdc)* into the next stitch, skip 1*, repeat around, joining to the 2nd chain of the initial ch3. - 16hdc, 8chs

Change Colour
4: Slst into the same stitch, 4dc in the ch1 space, slst into the space between the next 2 hdc's, *4dc in the next ch1 space, slst into the space between the next 2 hdc's*, repeat around, join to the slst. -32dc's, 8slst

Change Colour
5: Ch4, dc into the same stitch, ch2, skip the first 2 dc's of the next shell and dc between the 2nd and 3rd dc's, ch2, *2dc into the slst, ch2, skip the first 2 dc's of the next shell and dc between the 2nd and 3rd dc's, ch2*, repeat around, join to the ch3 -24dc, 32chs

Change Colours
6: Ch2, hdc in the next stitch, 2hdc in the next ch2 space, hdc in the next stitch, 2hdc in the next ch2 space, *hdc in the next 2 stitches, 2hdc in the ch2 space, hdc in the next stitch, 2hdc in the next ch2 space*, repeat around, join to the ch2. -56hdc

Change Colours
7: Ch3 (counts as hdc and ch1), skip the next stitch, *hdc in the next stitch, hdc around the post of the previous hdc, skip the next stitch*, repeat around, join to the second chain of the ch3. -55hdc, 1ch

8: Ch1, sc in the next ch1, sc in each stitch around, join to the first ch1. -56sc

Change Colours
9: Ch2 (counts as sc+ch1), sk1, *sc, ch1, sk1*, repeat around, join to the first ch of the ch2. -28sc

Change Colours
10: Slst into the ch1 space and ch2, *sc into the next ch1 space, ch1*, repeat around, join to the first ch of the ch2. -28sc

Chance Colours
11: Ch2, hdc in each stitch and chain around, join to the ch2. - 56sc

Change Colours
12: Ch3, dc in the same stitch, 2dc in the next stitch, skip 2 stitches, *2dc in each of the next 2 stitches, skip 2 stitches*, repeat around, join to the ch3. -56dc

Change Colours
13: Slst into the next stitch, ch2, hdc in the same stitch, 2hdc in the next stitch, skip 2 stitches, *2hdc in each of the next 2 stitches, skip 2 stitches*, repeat around, join to the ch2. -56hdc

Change Colours
14: Ch1, sc in each stitch around, join to the ch1.-56sc

15. Ch1, crab stitch around, join to the ch1.

End off and weave in all tails.




Wednesday, September 27, 2017

27. Hayden Newborn Beanie



Good morning lovelies and welcome to day 27!
Ohh I actually love the number 27! It's my birthday number (of course, that's back in May, but still!) I also LOVE today's pattern!

The Hayden Beanie, is a little unique, in that it's made bottom up! That's right, we make the band first. Now, I know that sometimes counting rows, especially lots of them, can be a right pain, but I use this handy page to keep track! Row Counter is an awesome and simple site, just input your number of rows needed and off you go! So much easier to keep track!



The Hayden Beanie

You Will Need:
DK Weight/8ply Yarn
4mm hook

Sized To Fit:
Newborn/Full Term 40 weeks.

Band:

1: Ch9, sc in the second chain from hook and each across - 8sc
2: Ch1, turn, sc in each stitch across using back loops only. - 8sc
3-49: Repeat row 2.

End off, leaving a long tail. Sew the back together at the ends, being careful not to twist.
The join will be the back of the beanie

Body

1: Attach yarn to one of the edge stitches of the band and ch1, sc in the end rows of the band for 52sc, then join to the first sc

2-5: Ch2, hdc in each stitch around, join to the ch2. -52sc

6: Ch2, hdc in the next 10 stitches, hdc2tg, *hdc in the next 11 stitches, hdc2tg*, repeat around, join to the ch2. - 48hdc

7: Ch2, hdc in the next 5 stitches, hdc2tg, *hdc in the next 6 stitches, hdc2tg*, repeat around, join to the ch2. -42hdc

8: Ch2, hdc in the next 4 stitches, hdc2tg, *hdc in the next 5 stitches, hdc2tg*, repeat around, join to the ch2. -36hdc

9: Ch2, hdc in the next 3 stitches, hdc2tg, *hdc in the next 4 stitches, hdc2tg*, repeat around, join to the ch2. - 30hdc

10: Ch2, hdc in the next 2 stitches, hdc2tg, *hdc in the next 3 stitches, hdc2tg*, repeat around, join to the ch2. - 24hdc

11: Ch2, hdc in the next stitch, hdc2tg, *hdc in the next 2 stitches, hdc2tg*, repeat around, join to the ch2. - 18hdc

12: Ch2, hdc2tg, *hdc in the next stitch, hdc2tg*, repeat around, join to the ch2. - 12hdc

13: Ch2, hdc2tg 5 times, hdc in the last stitch. -7hdc

Leave a long tail and end off. Use the tail to gather the opening closed and finish off, weaving in all tails.

Alternative Colour Optoins
Use a contrasting colour for the band only.
Alternate colours to make stripes on the body of the hat.



Tuesday, September 26, 2017

26. Evelyn Preemie Beanie - QuackersCrochet Guest Post



Good morning all! Welcome to day 26!
Today we have something a little different. A guest post from the amazing Lisa over at Quackers Crochet
If you are a long time follower, you might remember Lisa designed for us the Charlot and Charlie Cocoon. Pop on over to her Facebook Page and say hi!
The Evelyn Beanie, will fit a bub of about 36-38 weeks gestation and is a super fast beanie to whip up!



Evelyn Beanie

You Will Need:
5 mm crochet hook
DK Weight/8 ply yarn 

Sized To Fit:
36-38 Weeks Gestation

The chains at the beginning of each round do not count as a stitch they just give you the height for the stitches in that row. Join to stitch not ch. First stitch made in same space as chain.

Chain 4, join with a slip stitch to form a ring
Round 1: ch 3, 9 dc in ring
Round 2: ch 3, 2 dc in each stitch around (18 stitches)
Round 3: *2 dc , dc in next stitch, Repeat from * (27 stitches)
Round 4: *2 dc, dc in each of next 2 stitches, repeat from * (36 stitches)
Round 5: ch 3, dc in each stitch
Round 6: ch 3, dc in each stitch
Round 7: ch 2, hdc in each stitch
Round 8: ch 3, dc in each stitch
Round 9: ch2, hdc in each stitch
Round 10: ch 3, dc in each stitch
Round 11: ch 2, hdc in each stitch

End off an weave in all tails.


Monday, September 25, 2017

25. Quirt Preemie Beanie


Good morning all and welcome to day 25!!!
Today's beanie, the Quirt, is designed for a full term 40 week newborn. However, drop off one increase round and you'll have a size to fit a 38 week preemie.

The quirt hat makes use of slip stitches to create a textured section. I used 3 shades of the same colour for mine to create an ombre effect, but you could use any colours. This is a great beanie to use up those few remaining meters of colour!




Quirt Beanie

You Will need:
4.5mm hook
DK Weight/8Ply Yarn

Sized To Fit:
40 weeks gestation, full term newborn.

1: Into a magic ring, ch1, hdc 9 times, join to the first hdc. -9hdc

2: Ch2, hdc into the same stitch, 2hdc in each stitch around, join to the ch2. -18hdc

3: Ch2, hdc in the same stitch, *hdc in the next stitch, 2hdc in the next stitch*, repeat around, join to the ch2. -27hdc

4: Ch2, hdc in the same stitch, *hdc in the next 2 stitches, 2hdc in the next stitch*, repeat around, join to the ch2. -36hdc

Skip this increase for 38 week size.
5: Ch2, hdc in the same stitch, *hdc in the next 3 stitches, 2hdc in the next stitch*, repeat around, join to the ch2. -45hdc

6-12: Ch2, hdc in each stitch around, join to the ch2.

13-15: Ch2, hdc in each stitch around, back loops only, join to the ch2.

16: Ch1, sc in each st around, join to the ch1.

End off main colour.

Using various coloured yarn, attach to the loops left from rounds 13-15 and sl st in each stitch around.

Sl st loosely or go up a size in hook to ensure they don't pull tight.

I find instead of slst to the first slst to join the round, just end off with the last slst into the last loop, and tie the ends together before weaving them in. It creates less bulk.

Weave in all tails.



Sunday, September 24, 2017

24: Lyn Preemie Bonnet Upsized



Good morning all and welcome to day 24!

Today's beanie is our last resize for the year, and this time it's the Lyn Bonnet. Ive had so many people ask for this one in a larger size, so here it is!!!




The Lyn Bonnet, Resized.

You Will Need:
DK Weight/8ply Yarn
4mm hook

Sized To Fit:
34-38 Weeks Gestation

1. Into a magic ring, ch2, hdc 9 times, join to the first hdc. -9hdc

2. Ch2, hdc in the same stitch, 2hdc in each stitch around, join to the ch2. -18hdc

3. Ch2, hdc in the same stitch, *hdc in the next stitch, 2hdc in the next stitch*, repeat around, join to the ch2. -27hdc

4. Ch2, hdc in the same stitch, *hdc in the next 2 stitches, 2hdc in the next stitch*, repeat around, join to the ch2. -36hdc

5: Ch2, hdc in the same stitch, *hdc in the next 3 stitches, 2hdc in the next stitch*, repeat around, join to the ch2. -45hdc

6: Ch2, hdc in the same stitch, *hdc in the next 4 stitches, 2hdc in the next stitch*, repeat around, do not join to the ch2. -54hdc

7. Ch3, turn, (dc, ch2, sc) in the next stitch, *skip 2 stitches, (dc, ch2, sc) in the next stitch*, repeat around, sc in the last stitch.

8. Ch2, turn, skip sc, (dc, ch2, sc) in the 1st ch2 space, *(dc, ch2, sc) in the next ch2 space*, repeat around, sc in the top of the turning chain.

9-12: Repeat row 8

At the end of row 12 chain 35 and then end off. This forms one tie. Join the yarn to the other corner with a slst and chain 35 for the second tie. End off. Weave in tails.



Saturday, September 23, 2017

23. Talia Preemie Beanie



Good morning all and hello day 23!

Today's beanie is another great beginner beanie. Proving that you don't need fancy stitches to make something delicate and sweet. This Talia beanie uses a simple edging of skipped stitches and picots to give it all it's charm.





Tarlia Beanie

You Will Need:
DK Weight/8ply Yarn
5mm hook

Sized To Fit:
32-34 Weeks Gestation

Picot: ch3, slst into the first chain. Picot made.

1: Into a magic ring make 12 hdc's, join to the first hdc. -12hdc

2: Ch2, hdc in the same stitch, 2hdc in each stitch around, join to the ch2. -24hdc

3: Ch2, hdc in the same stitch, hdc in the next stitch, *2dc in the next stitch, hdc in the next stitch*, repeat around, join to the ch2. -36hdc

4-11:  Ch2, hdc in each stitch around, join to the ch2. -36hdc

12: Ch3 (counts as first hdc and ch1), skip 1 stitch, *hdc in the next stitch, ch1, skip 1 stitch* repeat around, join to the 2nd chain of the ch3.

13: Ch1, sc in the same stitch, sc in the ch1 space, picot, *sc in the next stitch, sc in the ch1 space, picot*, repeat around, join to the ch1.

End off, weaving in all tails.


Friday, September 22, 2017

22. Elijah Newborn Beanie



Good morning all and welcome to day 22. Today's beanie is an upsize! The Elijah beanie, a classic granny stitch earflap beanie, has been redesigned so it will now fit a full term newborn. I love this style, and according to the numerous upsize requests, so do you guys!



The Elijah Beanie, Upsized

You Will Need:
DK Weight/8ply Yarn in 3 Colours (A, B and C)
4.0mm hook

Sized To Fit:
40 weeks gestation, full term newborn.

NOTE: For the sake of easy writing, each ch1 gap and each space between clusters will both be referred to as spaces.


With Colour A
1. Into a magic ring, ch2, 12 dc's, join to the first dc. -12dc

2. Ch3, 2dc in the same stitch, skip 1 stitch, *3dc in the next stitch, skip one stitch*, repeat around, join to the ch3. -18dc

Change To Colour B
3. Slst into the space between the 3dc clusters, (ch3, 2dc, ch1, 3dc) in the space, (3dc, ch1, 3dc) in each remaining space, join to the ch3. -36dc

4. Slst into the first space, ch3, 2dc in the same space, 3dc in each of the next 2 spaces, *(3dc, ch1, 3dc) in the next space, 3dc in each of the next 3 spaces*, repeat around. ending with a (3dc, ch1, 3dc) in the last space. -45dc

Change To Colour A
5. Slst into the next space between 3dc clusters, ch3, 2dc in the same space, 3dc in each remaining space around around, join to the ch3. -45dc

6: Repeat around 5.

Change To Colour B
7-8: Repeat round 5

Change To Colour A
9-10: Repeat round 5

Change To Colour B
11-12: Repeat round 5

10. Slst into the next space, ch3, 2dc in the same space, 3dc in the next space, 3dc in the next space, turn, ch1, 3dc in the next space, 3dc in the next space, ch1, slst to the top of the ch3. End off, one earflap made

11. Count off 5 spaces to the left of the earflap you just made and join yarn with a sl st, ch3, 2dc in the same space, 3dc in the next space, 3dc in the next space, turn, ch1, 3dc in the next space, 3dc in the next space, ch1, slst to the top of the ch3. End off, second earflap made

Change To Colour C
12. Join yarn to the space in the middle of an earflap, ch3, 2dc in the same space, 3dc in the ch1 space, dc once in the same space as the 3dc cluster from the previous round (view photo below to see location), 3dc in each space until you reach the next earflap, dc once in the same space as the previous 3dc cluster, 3dc in the ch1 space, 3dc in the next space, 3dc in the next ch1 space, dc in the same space as the 3dc cluster from previous round, 3dc in each space until you reach the 1st earflap, dc in the same space as the 3dc cluster from the previous round, 3dc in the ch1 space, join to the starting ch3. End off, weave in all tails.





Thursday, September 21, 2017

21. Ryan Preemie Beanie




Hello hello day 21! Gee, the end of our third week! Incredible!

Today's pattern, the Ryan beanie, is a sweet and small beanie, for 28-30 weeks gestation and features the seed stitch, and clever colour changes, to make zigzag stripes. Take note though, you will need a light hand for this one, as sc stitches can tend to get a bit tight, and won't have as much stretch as the hdc's do. It's such a pretty stitch though!



The Ryan Beanie

You Will Need:
DK Weight/8ply yarn in 3 colours
5mm hook.

Sized To Fit
28-30 Weeks Gestation

With main colour
1: Into a magic ring ch2, hdc 10 times, join to the first hdc -10hdc

2: Ch2, hdc in the same stitch, 2hdc in each stitch around, join to the ch2. -20hdc

3: Ch2, hdc in the same stitch, hdc in the next stitch, *2hdc in the next stitch, hdc in the next stitch*, repeat around, join. -30hdc

4: Ch2, hdc in the same stitch, hdc in the next 2 stitches, *2hdc in the next stitch, hdc in the next 2 stitches*, repeat around, join to the ch2. -40hdc

5: Ch2, hdc in each stitch around, join to the ch2. -40hdc

Change to first contrasting colour
7: Ch2 (counts as sc and ch1), skip 1 stitch, *sc in the next stitch, ch1, skip 1 stitch*, repeat around, join to the first chain of the ch2.

8: Slst into the ch2 space and ch2 (counts as first sc and ch1), (sc, ch1) in each ch1 space around. Join to the first ch of the ch2. *note: Pay attention to where the last sc+ch1 go, its easy to miss it because of the initial slst.

Change to the second contrasting colour

9-10: Repeat round 8

Change to the first contrasting colour

11-12: Repeat round 8

Change to the main colour

13-14: Ch2, hdc in each st and ch1 space around, join to the ch2.

End off and weave in tails.



Wednesday, September 20, 2017

20. Brittany Newborn Beanie



Good Morning all and welcome to day 20! Gosh, only 10 days left!

Today's pattern is something a little different. The Brittany beanie features zigzag puffs!!!
Now, given how puffy the puffs are, this beanie is quite large, and probably the largest one in the collection this year. It will easily fit a 9-10lb baby. But, thats ok! Because as we know, sadly angels come in all sizes, and some wonderful charities out there also provide hats to babbas that are a bit older. Im glad to have something to offer for this size range.

Having said that, if you want to make this one smaller, I would suggest dropping to a 4mm hook AND leaving out round 5 increases. Puffs need to be kept tight, so if your having tension problems, you could downsize your hook for those rounds too.



The Brittany Beanie

7 loop Puff Stitch: *Yarn over, insert hook into stitch, yarn over, pull through*, repeat twice more. There will be 7 loops on your hook. Yarn over, pull through all 7 loops

You Will Need:
DK weight yarn in 4 colours
4.5mm hook

Sized To Fit
Large Full Term Newborn (9-10lb)

1: Into a magic ring, ch2, hdc 9 times, join to the first hdc. -9hdc

2: Ch2, hdc into the same stitch, 2hdc in each stitch around, join to the ch2. - 18hdc

3: Ch2, hdc in the same stitch, *hdc in the next stitch, 2hdc in the next stitch*, repeat around, join to the ch2. - 27hdc

4: Ch2, hdc in the same stitch, *hdc in the next 2 stitches, 2hdc in the next stitch*, repeat around, join to the ch2. -36hdc

5: Ch2, hdc in the same stitch, *hdc in the next 3 stitches, 2hdc in the next stitch*, repeat around, join to the ch2. -45hdc

6-9: Ch2, hdc in each stitch around, join to the ch2. -45hdc

Change colour.

10: Ch3, puff stitch in the hdc BEFORE the ch3, ch1, *skip the next stitch, dc in the next stitch, puff stitch in the skipped stitch, ch1*, repeat around, when you get to the last puff stitch ch1 and join to the ch3.

Change colour.

11: Ch3, turn, puff stitch in between the last 2 puffs from the previous row, ch1, *skip the next stitch (ch1) and dc in the top of the next puff, puff stitch in the space between the last 2 puffs (see photo), ch1*, repeat around, join to the top of the ch3.

Change Colour.

12: Ch3, turn, puff stitch in between the last 2 puffs from the previous row, ch1, *skip the next stitch (ch1) and dc in the top of the next puff, ch1, puff stitch in the space between the last 2 puffs (see photo), ch1*, repeat around, join to the top of the ch3.

Change Colour (This round will be done with hdc instead of dc's to make it slightly shorter)

13: Ch3, turn, puff stitch in between the last 2 puffs from the previous row, ch1, *skip the next stitch (ch1) and hdc in the top of the next puff, ch1, puff stitch in the space between the last 2 puffs (see photo), ch1*, repeat around, join to the top of the ch3.

14: Ch2, turn, hdc in the top of each puff stitch and each ch1 (skip all dc stitches), join to the ch2.

15: Ch1, sc in each stitch around, join to ch1.

End off and weave in all tails.


Tuesday, September 19, 2017

19. Helen Preemie Beanie



Good morning all and a warm welcome to day 19. Today's beanie, the Helen, is a simple pattern that uses alternating rounds of hdc and sc to make some stripes! I love how they are different sizes! It's also finished with the crab stitch, which I am totally in love with right now. It's such a simple way to add a bit of texture to a beanie!




The Helen Beanie

You Will Need:
DK Weight/8ply yarn in a main and contrasting colour
4mm hook

Sized To Fit:
32-34 Weeks Gestation



1: Into a magic ring, ch2, hdc 9 times, join to the first hdc - 9hdc

2: Ch3, dc in the same stitch, 2dc in each stitch around, join to ch3. -18dc

3: Ch3, dc in the same stitch, dc in the next stitch,* 2dc in the next stitch, dc in the next stitch* repeat around, join to the ch3. -27dc

4: Ch3, dc in the same stitch, dc in the next 2 stitches,* 2dc in the next stitch, dc in the next 2 stitches* repeat around, join to the ch3. -36

5: Ch3, dc in the same stitch, dc in the next 3 stitches,* 2dc in the next stitch, dc in the next 3
 stitches* repeat around, join to the ch3. -45dc

Change To Contrasting Colour

6: Ch1, sc in each stitch around, join to the ch1.

Change To Main Colour

7: Ch2, hdc in each stitch around, join to the ch2.

8-13: Repeat rows 6 and 7 3 times, remembering to change colours each round.

14: Change to contrasting colour, crab stitch (reverse sc) in each stitch around. slst to join.

End off and weave in all tails.



Monday, September 18, 2017

18. Rose Bonnet Upsized




Good morning lovelies and helloooooo day 18!

Today's pattern is another upsize, this time of the Rose Bonnet, which was released for the last hat drive, but was sized super itty bitty tiny! This new version will fit 30 weeks gestation.




The Rose Bonnet

You Will Need:
DK Weight/8ply yarn
4mm hook

Sized To Fit:
30 Weeks Gestation.

1. Into a magic ring ch2, hdc 9 times, join to the first hdc. -9hdc

2. Ch2, hdc in the same stitch, 2hdc in each stitch around, join to the ch2. -18hdc

3. Ch2, *2hdc in the next stitch, hdc in the next stitch*, repeat around, join to the ch2. -27hdc

4. Ch2, hdc in the next stitch, 2hdc in the next stitch, *hdc in the next 2 stitches, 2hdc in the next stitch*, repeat around, join to the ch2. -36hdc

5. Ch2, hdc in the next 2 stitches, 2hdc in the next stitch, *hdc in the next 3 stitches, 2hdc in the next stitch*, repeat around, do not join. -45hdc

6. Ch1, turn, in the first stitch (slst, ch3, 2dc), shell made *skip 2 stitches, (slst, ch3, 2dc) in the next stitch, repeat around, sc in the last stitch.

7. Ch1, turn, (slst, ch3, 2dc) in the sc, *in the ch3 space of the next shell (slst, ch3, 2dc), repeat across, when you reach the last shell, sc in the ch3 space.

8-11. Repeat row 7

12. Do not turn, ch1, sc evenly along the base of the bonnet (neck area) when you reach the corner chain 35. End off. Join yarn to opposite corner and chain 35 for the second tie.


Sunday, September 17, 2017

17. Finley Newborn Beanie



Good morning all and hello day 17!

Today's pattern is the Finley beanie, and it's a sweet little aviator style. I love how sweet these look on! This beanie is sized for a full term newborn. It's so nice to have a range of full term sizes in the hat drive this year.  Most organisations I know support loss at every gestation (and some even into the first year) and so I'm really pleased to be able to offer patterns for those families too.

However, if you'd like to make it for a smaller preemie, or your local group focuses on smaller bubs, drop the hook size to a 3mm or 3.5mm

I havn't tried this one with stripes yet, but I bet it would be just as good! Another alternative would be to crab stitch the final round to change it up even more!



Finley Beanie

You Will Need:
DK Weight/8ply yarn, in a main and contrasting colour.
4mm hook
2 Matching Buttons

Sized To Fit:

Full term newborn

1: Into a magic ring, ch2, make 10dc, join to the first dc. -10dc

2: Ch3, dc in the same stitch, 2dc in each stitch around, join to the ch3. -20dc

3: Ch3, dc in the same stitch, dc in the next stitch, *2dc in the next stitch, dc in the next stitch*, repeat around, join to the ch3. -30dc

4: Ch3, dc in the same stitch, dc in the next 2 stitches, *2dc in the next stitch, dc in the next 2 stitches*, repeat around, join to the ch3. -40dc

5: Ch3, dc in the same stitch, dc in the next 3 stitches, *2dc in the next stitch, dc in the next 3 stitches*, repeat around, join to the ch3. -50dc

6-11: Ch3, dc in each stitch around, join to the ch3. -50dc

12: Ch2, hdc in each stitch around. join to the ch2. Do not end. -50hdc

Earflaps

1: Slst in the next 8 stitches, ch2, hdc in the same stitch, hdc in the next 7 stitches.
2: Ch2, turn, hdc in all 8 stitches.
3: Repeat row 2.
4: Ch2, turn, hdc2tg, hdc in the next 4 stitches, hdc2tg
5: Ch2, turn, hdc2tg, hdc in the next 2 stitches, hdc2tg
End off, weave in all tails.

Count 22 stitches to the left from the last stitch of the done earflap and reattach yarn
Repeat all earflap steps
End off, weave in all tails.

Adding the front panel. With contrasting colour

1: At the front of the hat, 2 stitches from the left of the right side earflap attach yarn to the front loop only. Ch1, sc in the same stitch and the next 18 stitches, using the front loops only.

2-6: Ch2, turn, hdc in each stitch across.
End off, weaving in tails.

Reattach main colour to rear of hat in any stitch, ch2, hdc in the same stitch, hdc around entire hat edge, including earflaps and brim. When you get to the earflaps, it helps to add a few extra hdc's on the corners of them to prevent curling.

End off and weave in all tails.

Fold brim up, tack into place, and add 2 buttons to decorate.


Saturday, September 16, 2017

16. Robby Preemie Beanie



Good morning all and welcome to day 16.

Today's pattern is something a little unique that I haven't done a lot of pattern wise. Using negative space to create a visual pattern. I love how the skipped stitches in the Robby beanie give the illusion of little arches in the hat. Now, I know the pattern looks like a wall of text, but trust me, it's pretty simple! The repeats are very easy to remember, promise! I made sure to write the steps out without shorthand, so even those new to crochet can complete this one :)





Robby Beanie

You Will Need:
DK Weight/8ply yarn
4mm hook

Sized To Fit:
38-40 Weeks Gestation (small newborn)

1: Into a magic ring ch2, dc 9 times, join to the first dc. -9dc

2. Ch3, dc 2 more times into the same stitch, ch1, skip the next stitch, *3dc in the next stitch, ch1, skip the next stitch*, repeat around, join to the ch3. -15dc

3: Ch3, 3dc in the next stitch, dc in the next stitch, ch1, skip the next chain, *dc in the next stitch, 3dc in the next stitch, dc in the next stitch, ch1, skip the next chain*, repeat around, join to the ch3. -25dc

4: Ch3, dc in the same stitch, dc in the next 3 stitches, 2dc in the next stitch, ch1, skip the next chain, *2dc in the next stitch, dc in the next 3 stitches, 2dc in the next stitch, ch1, skip the next chain*, repeat around, join to the ch3. -35dc

5: Ch3,  dc in the same stitch, dc in the next 5 stitches, 2dc in the next stitch, ch1, skip the next chain, *2dc in the next stitch, dc in the next 5 stitches, 2dc in the next stitch, ch1, skip the next chain*, repeat around, join to the ch3. - 45dc

6: Ch3, dc in the next 3 stitches, ch1, skip the next stitch, dc in the next 4 stitches, ch1, *skip the next ch1, dc in the next 4 stitches, ch1, skip the next stitch, dc in the next 4 stitches, ch1*, repeat around, join to the ch3. -40dc

7: Ch3, dc in the next 2 stitches, ch1, skip the next stitch, dc in the next ch, ch1, skip the next stitch, dc in the next 3 stitches, ch1, skip the next ch1 *dc in the next 3 stitches, ch1, skip the next stitch, dc in the next ch, ch1, dc in the next 3 stitches, ch1, skip the next chain*, repeat around, join to the ch3. -35dc

8: Ch3, dc in the next stitch, ch1, skip the next stitch, dc in the next ch, dc and ch, ch1, skip the next stitch, dc in the next 2 stitches, ch1, skip the next ch space,  *dc in the next 2 stitches, ch1, sk1, dc in the next ch, dc and ch, ch1, skip the next stitch, dc in the next 2 stitches, ch1*, repeat around, join to the the ch3. -35dc

9: Ch3, dc in the next stitch, , ch1, skip the next ch, dc in the next 3 stitches, ch1, skip the next chain, dc in the next 2 stitches, ch1, skip the next chain, *dc in the next 2 stitches, ch1, skip the next chain, dc in the next 3 stitches, ch1, skip the next chain, dc in the next 2 stitches, ch1, ski the next chain*, repeat around, join to the ch1.

10-11: Repeat round 9

12: Ch1, sc in each stitch and chain around, join to the ch1. -50sc

13: Ch1, sc in the back loop only of each stitch around, join to ch1. -50sc

End off and weave in all tails.